Base Plate 355 is automatically anchored to concrete or screw fixed to wood in either horizontal or vertical positions, using the 4 x 15mm pre drilled holes. Program - Base Plate 355 is utilized in the flat position in combination with a Sliding L Bracket and Handrail Post when compared with the flat suface is not practical. Base Plate 355 is used in the perpendicular position to obtain a Handrail Post when compared with the flat suface is sensible. Benefits - centric usage at 90 or 180.4 x 10mm uplift preventer holes on either side. Hot dipped galvanized for long lasting protection - Designed and built to comply with AS\/NZS 4994: 2009.
Substance - SHS 40 x 40 x 3.2mm - Plate 150 x 150 x 5mm - Description - Sliding L Bracket is placed on into the Base Plate 355 and kept in place by tightening the screw bolt with an 18mm socket. Program - Sliding L Bracket is used in the vertical place together with Base Plate 355. Benefits - Quick install with 18mm ratchet or cord-less drill. Hot dipped galvanized for long lasting protection. Designed and built to comply with AS\/NZS 4994: 2009. Substance - Description - L Bend can be utilized on residential roofs to link to the Beneath Rafter Bracket and Handrail Post.
Used to make a safety railing around the edge of domestic and residential roofs. Suits roof pitches between 22.5 and 30 degrees. Application - A L Bend bracket is utilized in conjunction with the lower bracket and Handrail Post to create safety rail around perimetre of residential roof. Benefits - Made From - Description - Handrail Post creates a vertical support to receive guard rails. Uplift is prevented by using a M10 Shaft Lock Pin. Attaches to Base Plate 150 or 355, Sliding L Bracket, L Bend and Base Plate. Application - Handrail Post is utilized In the vertical position together with base plate 150 or 355 - Benefits - Made From - SHS 30 x 30mm - Handle 10mm bar - Description - Rail swivel couplers are utilized to join two rails at any angle on the same plane.
Rail swivel couplers are utilized To combine two 30 x 30 SHS rail - Benefits - Made From - Description - Under Rafter Bracket was designed to attach to the exposed rafter. Maximum opening height is 170 and shuts down to 36mm. Used to make safety rail around perimetre of building. Application - utilized In conjunction with Handrail Post to make safety rail for gable ends. Gable End bracket may also be used where it isn't possible to clamp an under raft bracket or other fixing brackets to the rafter. Benefits: Adjustable in height - Fast install using cordless drill & 18mm socket - Hot dipped galvanized for long lasting protection.
Made From - Description
Ladder Access Rail is used where the ladder access passes throughout the handrail.
Ladder Access Rail attaches directly to Handrail Post shield rail via Prevents users from falling backwards. Benefits: Hot dipped galvanised for long lasting protection.